Sansetsu Guyse

Forum Replies Created

Viewing 7 replies - 1 through 7 (of 7 total)
  • Replies
    Sansetsu Guyse
    Participant

    I remember a time when Nikon would not tell anyone about how to deal with their raw files and their sensor profiles, but either adobe or capture one or both managed to figure something out to process the raw. It might be possible to do, but may not be worth BM’s time.

    Sansetsu Guyse
    Participant

    John thank you for the files, and thank you for the blog post you put up on your site about the camera and the sensor in it. Did I understand correctly that it is more about getting good 6k or 8k super sampled from the camera, than getting 12k.

    Sansetsu Guyse
    Participant

    https://www.bhphotovideo.com/c/search?Ntt=Tilta%20focus%20rings&N=0&InitialSearch=yes&sts=ma

    I bought the 78 to 80 mm for my tokina 28 to 70 2.8 poor mans angie. The fit was at the 80mm end of the range. Given the tightness of the fit I suspect at the 78mm end it would be tight there as well.

    Sansetsu Guyse
    Participant

    Great little clip, mesmerizing to watch
    Thanks for sharing.

    Sansetsu Guyse
    Participant

    We agree to disagree.

    Sansetsu Guyse
    Participant

    I think the camera would have to get bigger with the bmpcc4k sensor so that it can have the proper cooling. But even with that aside I want more bottons and a small menu display. Using the Using Philip Lemon’s last version of One Little Remote I can set hard stops (using the knob on the remote not the ring on the lens) and pull focus as well with native glass. It work very well with the pany 12-35 2.8. There is no technical reason that could not be implemented right on the camera body. Have, say up to 4 buttons to configure various focus points and when pressed use the knob or dial to control the speed of transition. Basically pressing the configured focus point button sets a new hard stop. Lots of use for the buttons other than basic camera settings. I am ok with the extra wide bmpcc4k sensor as long as I have 2700 pixel wide for s16. At that width I would also like an extended 1.33, 1.5, cropped 2.0, 2.35, 2.4, and 2.66.
    I would like BM to put a lot of bells and whistles in the camera and a lot of thought to make it the go to beginners cinema camera that would be available for mainly years to come.

    Sansetsu Guyse
    Participant

    I would love to see a new bmmcc4k camera with same expansion port, genlock, timecode full implemented. Full integration with video assist. Give us better battery mount options, Sony np-l. Optional v-mount adapter plate with power distribution built into (say 2×5 volt, 2x12volt) the plate. I will just stop there short of going into my full rant of wanting a highly modular camera that will be around and fully supported for at least 10+ years. But I know the gear head market will not allow for that.

Viewing 7 replies - 1 through 7 (of 7 total)